hrav@tlpi:~/wittypi $ cat wittyPi.log
[xxxx-xx-xx xx:xx:xx] Witty Pi daemon (v4.13) is started.
[xxxx-xx-xx xx:xx:xx] Running on Raspberry Pi 4 Model B Rev 1.1
[xxxx-xx-xx xx:xx:xx] Confliction: 1-Wire interface is enabled on GPIO-4, which is also used by Witty Pi.
[xxxx-xx-xx xx:xx:xx] Witty Pi daemon can not work until you solve this confliction and reboot Raspberry Pi.
[xxxx-xx-xx xx:xx:xx] Witty Pi daemon (v4.13) is started.
[xxxx-xx-xx xx:xx:xx] Running on Raspberry Pi 4 Model B Rev 1.1
[xxxx-xx-xx xx:xx:xx] Confliction: 1-Wire interface is enabled on GPIO-4, which is also used by Witty Pi.
[xxxx-xx-xx xx:xx:xx] Witty Pi daemon can not work until you solve this confliction and reboot Raspberry Pi.
[2023-12-27 10:26:01] Confliction detected:
[2023-12-27 10:26:01] 1-Wire interface is enabled on GPIO-4, which is also used by Witty Pi.
[2023-12-27 10:26:01] You may solve this confliction by moving 1-Wire interface to another GPIO pin.
[xxxx-xx-xx xx:xx:xx] Witty Pi daemon (v4.13) is started.
[xxxx-xx-xx xx:xx:xx] Running on Raspberry Pi 4 Model B Rev 1.1
[xxxx-xx-xx xx:xx:xx] RTC has bad time, write system time into RTC
[xxxx-xx-xx xx:xx:xx] Writing system time to RTC...
<2023-12-27 10:27:07> Done :-)
<2023-12-27 10:27:07> Firmware ID: 0x26
<2023-12-27 10:27:07> Firmware Revison: 0x05
<2023-12-27 10:27:08> Current Vout=4.93V, Iout=1.11A
<2023-12-27 10:27:08> System starts up because the button is clicked.
[2023-12-27 10:43:26] Writing system time to RTC...
<2023-12-27 10:43:26> Done :-)
<2023-12-27 10:46:02> Seting startup time to "27 10:47:00"
<2023-12-27 10:46:02> Done :-)
[2023-12-27 10:47:36] Seting startup time to "27 10:50:00"
[2023-12-27 10:47:36] Done :-)
[2023-12-27 10:47:59] Seting shutdown time to "27 10:48:00"
[2023-12-27 10:47:59] Done :-)
[2023-12-27 10:48:37] Seting startup time to "27 10:55:00"
[2023-12-27 10:48:37] Done :-)
[2023-12-27 10:48:54] Seting shutdown time to "27 10:52:00"
[2023-12-27 10:48:54] Done :-)
[xxxx-xx-xx xx:xx:xx] Witty Pi daemon (v4.13) is started.
[xxxx-xx-xx xx:xx:xx] Running on Raspberry Pi 4 Model B Rev 1.1
[xxxx-xx-xx xx:xx:xx] Seems RTC has good time, write RTC time into system
[xxxx-xx-xx xx:xx:xx] Writing RTC time to system...
[2023-12-27 12:14:06] Done :-)
[2023-12-27 12:14:06] Firmware ID: 0x26
[2023-12-27 12:14:06] Firmware Revison: 0x05
[2023-12-27 12:14:06] Current Vout=5.01V, Iout=0.62A
[2023-12-27 12:14:06] System starts up because the button is clicked.
[xxxx-xx-xx xx:xx:xx] Witty Pi daemon (v4.13) is started.
[xxxx-xx-xx xx:xx:xx] Running on Raspberry Pi 4 Model B Rev 1.1
[xxxx-xx-xx xx:xx:xx] Seems RTC has good time, write RTC time into system
[xxxx-xx-xx xx:xx:xx] Writing RTC time to system...
[2023-12-27 12:16:30] Done :-)
[2023-12-27 12:16:30] Firmware ID: 0x26
[2023-12-27 12:16:30] Firmware Revison: 0x05
[2023-12-27 12:16:30] Current Vout=5V, Iout=0.86A
[2023-12-27 12:16:30] System starts up because the button is clicked.
[xxxx-xx-xx xx:xx:xx] Witty Pi daemon (v4.13) is started.
[xxxx-xx-xx xx:xx:xx] Running on Raspberry Pi 4 Model B Rev 1.1
[xxxx-xx-xx xx:xx:xx] Seems RTC has good time, write RTC time into system
[xxxx-xx-xx xx:xx:xx] Writing RTC time to system...
[2023-12-27 12:19:33] Done :-)
[2023-12-27 12:19:33] Firmware ID: 0x26
[2023-12-27 12:19:33] Firmware Revison: 0x05
[2023-12-27 12:19:33] Current Vout=5.07V, Iout=1.01A
[2023-12-27 12:19:33] System starts up because the button is clicked.
[xxxx-xx-xx xx:xx:xx] Witty Pi daemon (v4.13) is started.
[xxxx-xx-xx xx:xx:xx] Running on Raspberry Pi 4 Model B Rev 1.1
[xxxx-xx-xx xx:xx:xx] Seems RTC has good time, write RTC time into system
[xxxx-xx-xx xx:xx:xx] Writing RTC time to system...
[2023-12-27 12:22:06] Done :-)
[2023-12-27 12:22:06] Firmware ID: 0x26
[2023-12-27 12:22:06] Firmware Revison: 0x05
[2023-12-27 12:22:06] Current Vout=5V, Iout=0.62A
[2023-12-27 12:22:06] System starts up because the button is clicked.
[xxxx-xx-xx xx:xx:xx] Witty Pi daemon (v4.13) is started.
[xxxx-xx-xx xx:xx:xx] Running on Raspberry Pi 4 Model B Rev 1.1
[xxxx-xx-xx xx:xx:xx] Seems RTC has good time, write RTC time into system
[xxxx-xx-xx xx:xx:xx] Writing RTC time to system...
[2023-12-27 12:24:10] Done :-)
[2023-12-27 12:24:10] Firmware ID: 0x26
[2023-12-27 12:24:10] Firmware Revison: 0x05
[2023-12-27 12:24:10] Current Vout=5V, Iout=0.9A
[2023-12-27 12:24:10] System starts up because the button is clicked.
[xxxx-xx-xx xx:xx:xx] Witty Pi daemon (v4.13) is started.
[xxxx-xx-xx xx:xx:xx] Running on Raspberry Pi 4 Model B Rev 1.1
[xxxx-xx-xx xx:xx:xx] Seems RTC has good time, write RTC time into system
[xxxx-xx-xx xx:xx:xx] Writing RTC time to system...
[2023-12-27 12:31:40] Done :-)
[2023-12-27 12:31:40] Firmware ID: 0x26
[2023-12-27 12:31:40] Firmware Revison: 0x05
[2023-12-27 12:31:40] Current Vout=4.93V, Iout=0.47A
[2023-12-27 12:31:40] System starts up because the button is clicked.
[xxxx-xx-xx xx:xx:xx] Witty Pi daemon (v4.13) is started.
[xxxx-xx-xx xx:xx:xx] Running on Raspberry Pi 4 Model B Rev 1.1
[xxxx-xx-xx xx:xx:xx] Seems RTC has good time, write RTC time into system
[xxxx-xx-xx xx:xx:xx] Writing RTC time to system...
[2023-12-27 12:44:54] Done :-)
[2023-12-27 12:44:54] Firmware ID: 0x26
[2023-12-27 12:44:54] Firmware Revison: 0x05
[2023-12-27 12:44:54] Current Vout=4.93V, Iout=1.01A
[2023-12-27 12:44:54] System starts up because the button is clicked.
[xxxx-xx-xx xx:xx:xx] Witty Pi daemon (v4.13) is started.
[xxxx-xx-xx xx:xx:xx] Running on Raspberry Pi 4 Model B Rev 1.1
[xxxx-xx-xx xx:xx:xx] Seems RTC has good time, write RTC time into system
[xxxx-xx-xx xx:xx:xx] Writing RTC time to system...
[2023-12-27 13:00:21] Done :-)
[2023-12-27 13:00:21] Firmware ID: 0x26
[2023-12-27 13:00:21] Firmware Revison: 0x05
[2023-12-27 13:00:21] Current Vout=4.92V, Iout=0.86A
[2023-12-27 13:00:21] System starts up because scheduled startup is due.
[xxxx-xx-xx xx:xx:xx] Witty Pi daemon (v4.13) is started.
[xxxx-xx-xx xx:xx:xx] Running on Raspberry Pi 4 Model B Rev 1.1
[xxxx-xx-xx xx:xx:xx] Seems RTC has good time, write RTC time into system
[xxxx-xx-xx xx:xx:xx] Writing RTC time to system...
[2023-12-27 13:15:57] Done :-)
[2023-12-27 13:15:57] Firmware ID: 0x26
[2023-12-27 13:15:57] Firmware Revison: 0x05
[2023-12-27 13:15:57] Current Vout=5V, Iout=0.79A
[2023-12-27 13:15:57] System starts up because the button is clicked.