[xxxx-xx-xx xx:xx:xx] Witty Pi daemon (v4.21) is started. [xxxx-xx-xx xx:xx:xx] System: Raspbian GNU/Linux 11 (bullseye), Kernel: Linux 6.1.21-v8+, Architecture: armhf [xxxx-xx-xx xx:xx:xx] Running on Raspberry Pi 4 Model B Rev 1.1 [xxxx-xx-xx xx:xx:xx] RTC offset register has value 0x77 [xxxx-xx-xx xx:xx:xx] Seems RTC has good time, write RTC time into system [xxxx-xx-xx xx:xx:xx] Writing RTC time to system... [2024-08-04 21:56:08] Done :-) [2024-08-04 21:56:08] Firmware ID: 0x36 [2024-08-04 21:56:08] Firmware Revison: 0x05 [2024-08-04 21:56:08] Current Vout=4.81V, Iout=0.98A [2024-08-04 21:56:08] System starts up because the button is clicked. [2024-08-04 21:56:15] Send out the SYS_UP signal via GPIO-17 pin. [2024-08-04 21:56:15] Pending for incoming shutdown command... [2024-08-04 21:56:16] Schedule next shutdown at: 2024-08-04 23:00:00 [2024-08-04 21:56:16] Schedule next startup at: 2024-08-05 00:00:00 [2024-08-04 22:59:58] Shutting down system because scheduled shutdown is due. cvlc: no process found feh: no process found display: no process found [2024-08-04 23:02:58] Halting all processes and then shutdown Raspberry Pi... [xxxx-xx-xx xx:xx:xx] Witty Pi daemon (v4.21) is started. [xxxx-xx-xx xx:xx:xx] System: Raspbian GNU/Linux 11 (bullseye), Kernel: Linux 6.1.21-v8+, Architecture: armhf [xxxx-xx-xx xx:xx:xx] Running on Raspberry Pi 4 Model B Rev 1.1 [xxxx-xx-xx xx:xx:xx] RTC offset register has value 0x77 [xxxx-xx-xx xx:xx:xx] Seems RTC has good time, write RTC time into system [xxxx-xx-xx xx:xx:xx] Writing RTC time to system... [2024-08-05 01:12:07] Done :-) [2024-08-05 01:12:07] Firmware ID: 0x36 [2024-08-05 01:12:07] Firmware Revison: 0x05 [2024-08-05 01:12:07] Current Vout=4.94V, Iout=0.49A [2024-08-05 01:12:07] Unknown/incorrect startup reason: 0x02 [2024-08-05 01:12:16] Send out the SYS_UP signal via GPIO-17 pin. [2024-08-05 01:12:16] Pending for incoming shutdown command... [2024-08-05 01:12:16] Schedule next shutdown at: 2024-08-05 03:00:00 [2024-08-05 01:12:16] Schedule next startup at: 2024-08-05 04:00:00 [xxxx-xx-xx xx:xx:xx] Witty Pi daemon (v4.21) is started. [xxxx-xx-xx xx:xx:xx] System: Raspbian GNU/Linux 11 (bullseye), Kernel: Linux 6.1.21-v8+, Architecture: armhf [xxxx-xx-xx xx:xx:xx] Running on Raspberry Pi 4 Model B Rev 1.1 [xxxx-xx-xx xx:xx:xx] RTC offset register has value 0x77 [xxxx-xx-xx xx:xx:xx] Seems RTC has good time, write RTC time into system [xxxx-xx-xx xx:xx:xx] Writing RTC time to system... [2024-08-05 04:00:48] Done :-) [2024-08-05 04:00:48] Firmware ID: 0x36 [2024-08-05 04:00:48] Firmware Revison: 0x05 [2024-08-05 04:00:48] Current Vout=5V, Iout=0.55A [2024-08-05 04:00:48] System starts up because scheduled startup is due. [2024-08-05 04:00:54] Send out the SYS_UP signal via GPIO-17 pin. [2024-08-05 04:00:54] Pending for incoming shutdown command... [2024-08-05 04:00:56] Schedule next shutdown at: 2024-08-05 05:00:00 [2024-08-05 04:00:57] Schedule next startup at: 2024-08-05 06:00:00 [xxxx-xx-xx xx:xx:xx] Witty Pi daemon (v4.21) is started. [xxxx-xx-xx xx:xx:xx] System: Raspbian GNU/Linux 11 (bullseye), Kernel: Linux 6.1.21-v8+, Architecture: armhf [xxxx-xx-xx xx:xx:xx] Running on Raspberry Pi 4 Model B Rev 1.1 [xxxx-xx-xx xx:xx:xx] RTC offset register has value 0x77 [xxxx-xx-xx xx:xx:xx] Seems RTC has good time, write RTC time into system [xxxx-xx-xx xx:xx:xx] Writing RTC time to system... [2024-08-05 06:00:23] Done :-) [2024-08-05 06:00:23] Firmware ID: 0x36 [2024-08-05 06:00:23] Firmware Revison: 0x05 [2024-08-05 06:00:23] Current Vout=4.93V, Iout=0.88A [2024-08-05 06:00:23] System starts up because scheduled startup is due. [2024-08-05 06:00:31] Send out the SYS_UP signal via GPIO-17 pin. [2024-08-05 06:00:31] Pending for incoming shutdown command... [2024-08-05 06:00:31] Schedule next shutdown at: 2024-08-05 07:00:00 [2024-08-05 06:00:31] Schedule next startup at: 2024-08-05 08:00:00 [2024-08-05 06:59:58] Shutting down system because scheduled shutdown is due. [xxxx-xx-xx xx:xx:xx] Witty Pi daemon (v4.21) is started. [xxxx-xx-xx xx:xx:xx] System: Raspbian GNU/Linux 11 (bullseye), Kernel: Linux 6.1.21-v8+, Architecture: armhf [xxxx-xx-xx xx:xx:xx] Running on Raspberry Pi 4 Model B Rev 1.1 [xxxx-xx-xx xx:xx:xx] RTC offset register has value 0x77 [xxxx-xx-xx xx:xx:xx] Seems RTC has good time, write RTC time into system [xxxx-xx-xx xx:xx:xx] Writing RTC time to system... [2024-08-05 08:00:24] Done :-) [2024-08-05 08:00:24] Firmware ID: 0x36 [2024-08-05 08:00:24] Firmware Revison: 0x05 [2024-08-05 08:00:24] Current Vout=4.93V, Iout=0.77A [2024-08-05 08:00:24] System starts up because scheduled startup is due. [2024-08-05 08:00:29] Send out the SYS_UP signal via GPIO-17 pin. [2024-08-05 08:00:30] Pending for incoming shutdown command... [2024-08-05 08:00:30] Schedule next shutdown at: 2024-08-05 09:00:00 [2024-08-05 08:00:30] Schedule next startup at: 2024-08-05 10:00:00 [xxxx-xx-xx xx:xx:xx] Witty Pi daemon (v4.21) is started. [xxxx-xx-xx xx:xx:xx] System: Raspbian GNU/Linux 11 (bullseye), Kernel: Linux 6.1.21-v8+, Architecture: armhf [xxxx-xx-xx xx:xx:xx] Running on Raspberry Pi 4 Model B Rev 1.1 [xxxx-xx-xx xx:xx:xx] RTC offset register has value 0x77 [xxxx-xx-xx xx:xx:xx] Seems RTC has good time, write RTC time into system [xxxx-xx-xx xx:xx:xx] Writing RTC time to system... [2024-08-05 10:00:26] Done :-) [2024-08-05 10:00:26] Firmware ID: 0x36 [2024-08-05 10:00:26] Firmware Revison: 0x05 [2024-08-05 10:00:26] Current Vout=4.92V, Iout=0.88A [2024-08-05 10:00:26] System starts up because scheduled startup is due. [2024-08-05 10:00:32] Send out the SYS_UP signal via GPIO-17 pin. [2024-08-05 10:00:32] Pending for incoming shutdown command... [2024-08-05 10:00:38] Schedule next shutdown at: 2024-08-05 11:00:00 [2024-08-05 10:00:38] Schedule next startup at: 2024-08-05 12:00:00 [2024-08-05 10:59:58] Shutting down system because scheduled shutdown is due. [xxxx-xx-xx xx:xx:xx] Witty Pi daemon (v4.21) is started. [xxxx-xx-xx xx:xx:xx] System: Raspbian GNU/Linux 11 (bullseye), Kernel: Linux 6.1.21-v8+, Architecture: armhf [xxxx-xx-xx xx:xx:xx] Running on Raspberry Pi 4 Model B Rev 1.1 [xxxx-xx-xx xx:xx:xx] RTC offset register has value 0x77 [xxxx-xx-xx xx:xx:xx] Seems RTC has good time, write RTC time into system [xxxx-xx-xx xx:xx:xx] Writing RTC time to system... [2024-08-05 12:00:26] Done :-) [2024-08-05 12:00:26] Firmware ID: 0x36 [2024-08-05 12:00:26] Firmware Revison: 0x05 [2024-08-05 12:00:26] Current Vout=4.93V, Iout=0.86A [2024-08-05 12:00:26] System starts up because scheduled startup is due. [2024-08-05 12:00:33] Send out the SYS_UP signal via GPIO-17 pin. [2024-08-05 12:00:38] Pending for incoming shutdown command... [2024-08-05 12:00:38] Schedule next shutdown at: 2024-08-05 13:00:00 [2024-08-05 12:00:39] Schedule next startup at: 2024-08-05 14:00:00 [2024-08-05 12:59:59] Shutting down system because scheduled shutdown is due. [xxxx-xx-xx xx:xx:xx] Witty Pi daemon (v4.21) is started. [xxxx-xx-xx xx:xx:xx] System: Raspbian GNU/Linux 11 (bullseye), Kernel: Linux 6.1.21-v8+, Architecture: armhf [xxxx-xx-xx xx:xx:xx] Running on Raspberry Pi 4 Model B Rev 1.1 [xxxx-xx-xx xx:xx:xx] RTC offset register has value 0x77 [xxxx-xx-xx xx:xx:xx] Seems RTC has good time, write RTC time into system [xxxx-xx-xx xx:xx:xx] Writing RTC time to system... [2024-08-05 14:00:24] Done :-) [2024-08-05 14:00:24] Firmware ID: 0x36 [2024-08-05 14:00:24] Firmware Revison: 0x05 [2024-08-05 14:00:24] Current Vout=5V, Iout=0.7A [2024-08-05 14:00:24] System starts up because scheduled startup is due. [2024-08-05 14:00:32] Send out the SYS_UP signal via GPIO-17 pin. [2024-08-05 14:00:33] Pending for incoming shutdown command... [2024-08-05 14:00:35] Schedule next shutdown at: 2024-08-05 15:00:00 [2024-08-05 14:00:35] Schedule next startup at: 2024-08-05 16:00:00 [2024-08-05 14:59:58] Shutting down system because scheduled shutdown is due. [xxxx-xx-xx xx:xx:xx] Witty Pi daemon (v4.21) is started. [xxxx-xx-xx xx:xx:xx] System: Raspbian GNU/Linux 11 (bullseye), Kernel: Linux 6.1.21-v8+, Architecture: armhf [xxxx-xx-xx xx:xx:xx] Running on Raspberry Pi 4 Model B Rev 1.1 [xxxx-xx-xx xx:xx:xx] RTC offset register has value 0x77 [xxxx-xx-xx xx:xx:xx] Seems RTC has good time, write RTC time into system [xxxx-xx-xx xx:xx:xx] Writing RTC time to system... [2024-08-05 16:00:27] Done :-) [2024-08-05 16:00:27] Firmware ID: 0x36 [2024-08-05 16:00:27] Firmware Revison: 0x05 [2024-08-05 16:00:27] Current Vout=4.93V, Iout=0.94A [2024-08-05 16:00:27] System starts up because scheduled startup is due. [2024-08-05 16:00:36] Send out the SYS_UP signal via GPIO-17 pin. [2024-08-05 16:00:38] Schedule next shutdown at: 2024-08-05 17:00:00 [2024-08-05 16:00:38] Pending for incoming shutdown command... [2024-08-05 16:00:38] Schedule next startup at: 2024-08-05 18:00:00 [2024-08-05 16:59:59] Shutting down system because scheduled shutdown is due. [xxxx-xx-xx xx:xx:xx] Witty Pi daemon (v4.21) is started. [xxxx-xx-xx xx:xx:xx] System: Raspbian GNU/Linux 11 (bullseye), Kernel: Linux 6.1.21-v8+, Architecture: armhf [xxxx-xx-xx xx:xx:xx] Running on Raspberry Pi 4 Model B Rev 1.1 [xxxx-xx-xx xx:xx:xx] RTC offset register has value 0x77 [xxxx-xx-xx xx:xx:xx] Seems RTC has good time, write RTC time into system [xxxx-xx-xx xx:xx:xx] Writing RTC time to system... [2024-08-05 17:51:15] Done :-) [2024-08-05 17:51:15] Firmware ID: 0x36 [2024-08-05 17:51:15] Firmware Revison: 0x05 [2024-08-05 17:51:15] Current Vout=4.98V, Iout=0A [2024-08-05 17:51:15] Unknown/incorrect startup reason: 0x02 [2024-08-05 17:51:22] Send out the SYS_UP signal via GPIO-17 pin. [2024-08-05 17:51:23] Pending for incoming shutdown command... [2024-08-05 17:51:23] Schedule script is interrupted, revising the schedule... [2024-08-05 17:51:24] Schedule next shutdown at: 2024-08-05 17:59:00 [2024-08-05 17:51:24] Schedule next startup at: 2024-08-05 18:00:00 [2024-08-05 17:58:59] Shutting down system because scheduled shutdown is due. feh: no process found vlc: no process found display: no process found cvlc: no process found [2024-08-05 18:02:00] Halting all processes and then shutdown Raspberry Pi... [xxxx-xx-xx xx:xx:xx] Witty Pi daemon (v4.21) is started. [xxxx-xx-xx xx:xx:xx] System: Raspbian GNU/Linux 11 (bullseye), Kernel: Linux 6.1.21-v8+, Architecture: armhf [xxxx-xx-xx xx:xx:xx] Running on Raspberry Pi 4 Model B Rev 1.1 [xxxx-xx-xx xx:xx:xx] RTC offset register has value 0x77 [xxxx-xx-xx xx:xx:xx] Seems RTC has good time, write RTC time into system [xxxx-xx-xx xx:xx:xx] Writing RTC time to system... [2024-08-05 18:04:19] Done :-) [2024-08-05 18:04:19] Firmware ID: 0x36 [2024-08-05 18:04:19] Firmware Revison: 0x05 [2024-08-05 18:04:19] Current Vout=5.1V, Iout=0A [2024-08-05 18:04:19] System starts up because the button is clicked. [2024-08-05 18:04:24] Send out the SYS_UP signal via GPIO-17 pin. [2024-08-05 18:04:24] Pending for incoming shutdown command... [2024-08-05 18:04:24] Schedule next shutdown at: 2024-08-05 19:00:00 [2024-08-05 18:04:25] Schedule next startup at: 2024-08-05 20:00:00 [xxxx-xx-xx xx:xx:xx] Witty Pi daemon (v4.21) is started. [xxxx-xx-xx xx:xx:xx] System: Raspbian GNU/Linux 11 (bullseye), Kernel: Linux 6.1.21-v8+, Architecture: armhf [xxxx-xx-xx xx:xx:xx] Running on Raspberry Pi 4 Model B Rev 1.1 [xxxx-xx-xx xx:xx:xx] RTC offset register has value 0x77 [xxxx-xx-xx xx:xx:xx] Seems RTC has good time, write RTC time into system [xxxx-xx-xx xx:xx:xx] Writing RTC time to system... [2024-08-05 18:38:55] Done :-) [2024-08-05 18:38:55] Firmware ID: 0x36 [2024-08-05 18:38:55] Firmware Revison: 0x05 [2024-08-05 18:38:55] Current Vout=5.14V, Iout=0.58A [2024-08-05 18:38:55] System starts up because the button is clicked. [2024-08-05 18:39:00] Send out the SYS_UP signal via GPIO-17 pin. [2024-08-05 18:39:00] Pending for incoming shutdown command... [2024-08-05 18:39:00] Schedule next shutdown at: 2024-08-05 19:00:00 [2024-08-05 18:39:00] Schedule next startup at: 2024-08-05 20:00:00 [2024-08-05 18:59:59] Shutting down system because scheduled shutdown is due. feh: no process found cvlc: no process found display: no process found [2024-08-05 19:02:59] Halting all processes and then shutdown Raspberry Pi... [xxxx-xx-xx xx:xx:xx] Witty Pi daemon (v4.21) is started. [xxxx-xx-xx xx:xx:xx] System: Raspbian GNU/Linux 11 (bullseye), Kernel: Linux 6.1.21-v8+, Architecture: armhf [xxxx-xx-xx xx:xx:xx] Running on Raspberry Pi 4 Model B Rev 1.1 [xxxx-xx-xx xx:xx:xx] RTC offset register has value 0x77 [xxxx-xx-xx xx:xx:xx] Seems RTC has good time, write RTC time into system [xxxx-xx-xx xx:xx:xx] Writing RTC time to system... [2024-08-05 20:46:18] Done :-) [2024-08-05 20:46:18] Firmware ID: 0x36 [2024-08-05 20:46:18] Firmware Revison: 0x05 [2024-08-05 20:46:18] Current Vout=4.95V, Iout=0.47A [2024-08-05 20:46:18] Unknown/incorrect startup reason: 0x02 [2024-08-05 20:46:23] Send out the SYS_UP signal via GPIO-17 pin. [2024-08-05 20:46:23] Pending for incoming shutdown command... [2024-08-05 20:46:24] Schedule next shutdown at: 2024-08-05 21:00:00 [2024-08-05 20:46:24] Schedule next startup at: 2024-08-05 22:00:00 [xxxx-xx-xx xx:xx:xx] Witty Pi daemon (v4.21) is started. [xxxx-xx-xx xx:xx:xx] System: Raspbian GNU/Linux 11 (bullseye), Kernel: Linux 6.1.21-v8+, Architecture: armhf [xxxx-xx-xx xx:xx:xx] Running on Raspberry Pi 4 Model B Rev 1.1 [xxxx-xx-xx xx:xx:xx] RTC offset register has value 0x77 [xxxx-xx-xx xx:xx:xx] Seems RTC has good time, write RTC time into system [xxxx-xx-xx xx:xx:xx] Writing RTC time to system... [2024-08-05 22:00:30] Done :-) [2024-08-05 22:00:30] Firmware ID: 0x36 [2024-08-05 22:00:30] Firmware Revison: 0x05 [2024-08-05 22:00:30] Current Vout=4.88V, Iout=0.58A [2024-08-05 22:00:30] System starts up because scheduled startup is due. [2024-08-05 22:00:39] Send out the SYS_UP signal via GPIO-17 pin. [2024-08-05 22:00:42] Schedule next shutdown at: 2024-08-05 23:00:00 [2024-08-05 22:00:42] Pending for incoming shutdown command... [2024-08-05 22:00:42] Schedule next startup at: 2024-08-06 00:00:00 [2024-08-05 22:59:58] Shutting down system because scheduled shutdown is due. [xxxx-xx-xx xx:xx:xx] Witty Pi daemon (v4.21) is started. [xxxx-xx-xx xx:xx:xx] System: Raspbian GNU/Linux 11 (bullseye), Kernel: Linux 6.1.21-v8+, Architecture: armhf [xxxx-xx-xx xx:xx:xx] Running on Raspberry Pi 4 Model B Rev 1.1 [xxxx-xx-xx xx:xx:xx] RTC offset register has value 0x77 [xxxx-xx-xx xx:xx:xx] Seems RTC has good time, write RTC time into system [xxxx-xx-xx xx:xx:xx] Writing RTC time to system... [2024-08-06 00:00:29] Done :-) [2024-08-06 00:00:29] Firmware ID: 0x36 [2024-08-06 00:00:29] Firmware Revison: 0x05 [2024-08-06 00:00:29] Current Vout=4.88V, Iout=0.51A [2024-08-06 00:00:29] System starts up because scheduled startup is due. [2024-08-06 00:00:34] Send out the SYS_UP signal via GPIO-17 pin. [2024-08-06 00:00:34] Pending for incoming shutdown command... [2024-08-06 00:00:34] Schedule next shutdown at: 2024-08-06 01:00:00 [2024-08-06 00:00:34] Schedule next startup at: 2024-08-06 02:00:00 [2024-08-06 00:59:59] Shutting down system because scheduled shutdown is due. [xxxx-xx-xx xx:xx:xx] Witty Pi daemon (v4.21) is started. [xxxx-xx-xx xx:xx:xx] System: Raspbian GNU/Linux 11 (bullseye), Kernel: Linux 6.1.21-v8+, Architecture: armhf [xxxx-xx-xx xx:xx:xx] Running on Raspberry Pi 4 Model B Rev 1.1 [xxxx-xx-xx xx:xx:xx] RTC offset register has value 0x77 [xxxx-xx-xx xx:xx:xx] Seems RTC has good time, write RTC time into system [xxxx-xx-xx xx:xx:xx] Writing RTC time to system... [2024-08-06 02:00:27] Done :-) [2024-08-06 02:00:27] Firmware ID: 0x36 [2024-08-06 02:00:27] Firmware Revison: 0x05 [2024-08-06 02:00:27] Current Vout=4.95V, Iout=0.49A [2024-08-06 02:00:27] System starts up because scheduled startup is due. [2024-08-06 02:00:35] Send out the SYS_UP signal via GPIO-17 pin. [2024-08-06 02:00:35] Pending for incoming shutdown command... [2024-08-06 02:00:36] Schedule next shutdown at: 2024-08-06 03:00:00 [2024-08-06 02:00:36] Schedule next startup at: 2024-08-06 04:00:00 [xxxx-xx-xx xx:xx:xx] Witty Pi daemon (v4.21) is started. [xxxx-xx-xx xx:xx:xx] System: Raspbian GNU/Linux 11 (bullseye), Kernel: Linux 6.1.21-v8+, Architecture: armhf [xxxx-xx-xx xx:xx:xx] Running on Raspberry Pi 4 Model B Rev 1.1 [xxxx-xx-xx xx:xx:xx] RTC offset register has value 0x77 [xxxx-xx-xx xx:xx:xx] Seems RTC has good time, write RTC time into system [xxxx-xx-xx xx:xx:xx] Writing RTC time to system... [2024-08-06 04:00:24] Done :-) [2024-08-06 04:00:24] Firmware ID: 0x36 [2024-08-06 04:00:24] Firmware Revison: 0x05 [2024-08-06 04:00:24] Current Vout=4.95V, Iout=0.47A [2024-08-06 04:00:24] System starts up because scheduled startup is due. [2024-08-06 04:00:29] Send out the SYS_UP signal via GPIO-17 pin. [2024-08-06 04:00:30] Pending for incoming shutdown command... [2024-08-06 04:00:30] Schedule next shutdown at: 2024-08-06 05:00:00 [2024-08-06 04:00:30] Schedule next startup at: 2024-08-06 06:00:00 [2024-08-06 04:59:59] Shutting down system because scheduled shutdown is due. [xxxx-xx-xx xx:xx:xx] Witty Pi daemon (v4.21) is started. [xxxx-xx-xx xx:xx:xx] System: Raspbian GNU/Linux 11 (bullseye), Kernel: Linux 6.1.21-v8+, Architecture: armhf [xxxx-xx-xx xx:xx:xx] Running on Raspberry Pi 4 Model B Rev 1.1 [xxxx-xx-xx xx:xx:xx] RTC offset register has value 0x77 [xxxx-xx-xx xx:xx:xx] Seems RTC has good time, write RTC time into system [xxxx-xx-xx xx:xx:xx] Writing RTC time to system... [2024-08-06 06:00:24] Done :-) [2024-08-06 06:00:24] Firmware ID: 0x36 [2024-08-06 06:00:24] Firmware Revison: 0x05 [2024-08-06 06:00:24] Current Vout=5.02V, Iout=0.62A [2024-08-06 06:00:24] System starts up because scheduled startup is due. [2024-08-06 06:00:31] Send out the SYS_UP signal via GPIO-17 pin. [2024-08-06 06:00:32] Schedule next shutdown at: 2024-08-06 07:00:00 [2024-08-06 06:00:32] Pending for incoming shutdown command... [2024-08-06 06:00:32] Schedule next startup at: 2024-08-06 08:00:00 [xxxx-xx-xx xx:xx:xx] Witty Pi daemon (v4.21) is started. [xxxx-xx-xx xx:xx:xx] System: Raspbian GNU/Linux 11 (bullseye), Kernel: Linux 6.1.21-v8+, Architecture: armhf [xxxx-xx-xx xx:xx:xx] Running on Raspberry Pi 4 Model B Rev 1.1 [xxxx-xx-xx xx:xx:xx] RTC offset register has value 0x77 [xxxx-xx-xx xx:xx:xx] Seems RTC has good time, write RTC time into system [xxxx-xx-xx xx:xx:xx] Writing RTC time to system... [2024-08-06 07:05:30] Done :-) [2024-08-06 07:05:30] Firmware ID: 0x36 [2024-08-06 07:05:30] Firmware Revison: 0x05 [2024-08-06 07:05:30] Current Vout=4.94V, Iout=0.49A [2024-08-06 07:05:30] Unknown/incorrect startup reason: 0x02 [2024-08-06 07:05:39] Send out the SYS_UP signal via GPIO-17 pin. [2024-08-06 07:05:41] Schedule script is interrupted, revising the schedule... [2024-08-06 07:05:41] Schedule next shutdown at: 2024-08-06 07:59:00 [2024-08-06 07:05:41] Pending for incoming shutdown command... [2024-08-06 07:05:41] Schedule next startup at: 2024-08-06 08:00:00 [xxxx-xx-xx xx:xx:xx] Witty Pi daemon (v4.21) is started. [xxxx-xx-xx xx:xx:xx] System: Raspbian GNU/Linux 11 (bullseye), Kernel: Linux 6.1.21-v8+, Architecture: armhf [xxxx-xx-xx xx:xx:xx] Running on Raspberry Pi 4 Model B Rev 1.1 [xxxx-xx-xx xx:xx:xx] RTC offset register has value 0x77 [xxxx-xx-xx xx:xx:xx] Seems RTC has good time, write RTC time into system [xxxx-xx-xx xx:xx:xx] Writing RTC time to system... [2024-08-06 08:00:24] Done :-) [2024-08-06 08:00:24] Firmware ID: 0x36 [2024-08-06 08:00:24] Firmware Revison: 0x05 [2024-08-06 08:00:24] Current Vout=4.88V, Iout=0.51A [2024-08-06 08:00:24] System starts up because scheduled startup is due. [2024-08-06 08:00:30] Send out the SYS_UP signal via GPIO-17 pin. [2024-08-06 08:00:30] Pending for incoming shutdown command... [2024-08-06 08:00:32] Schedule next shutdown at: 2024-08-06 09:00:00 [2024-08-06 08:00:33] Schedule next startup at: 2024-08-06 10:00:00 [xxxx-xx-xx xx:xx:xx] Witty Pi daemon (v4.21) is started. [xxxx-xx-xx xx:xx:xx] System: Raspbian GNU/Linux 11 (bullseye), Kernel: Linux 6.1.21-v8+, Architecture: armhf [xxxx-xx-xx xx:xx:xx] Running on Raspberry Pi 4 Model B Rev 1.1 [xxxx-xx-xx xx:xx:xx] RTC offset register has value 0x77 [xxxx-xx-xx xx:xx:xx] Seems RTC has good time, write RTC time into system [xxxx-xx-xx xx:xx:xx] Writing RTC time to system... [2024-08-06 09:45:33] Done :-) [2024-08-06 09:45:33] Firmware ID: 0x36 [2024-08-06 09:45:33] Firmware Revison: 0x05 [2024-08-06 09:45:33] Current Vout=4.95V, Iout=0.64A [2024-08-06 09:45:33] Unknown/incorrect startup reason: 0x02 [2024-08-06 09:45:42] Send out the SYS_UP signal via GPIO-17 pin. [2024-08-06 09:45:44] Schedule script is interrupted, revising the schedule... [2024-08-06 09:45:44] Schedule next shutdown at: 2024-08-06 09:59:00 [2024-08-06 09:45:44] Pending for incoming shutdown command... [2024-08-06 09:45:44] Schedule next startup at: 2024-08-06 10:00:00